Advertisement
Step 20: Cupola Assembly
Part 3
A: Place Steel Cupola Mount over the Bell. From inside the Bell push the Bell Clapper with screw upwards so
that it is going through the Bell and the center hole on the Cupola Mount. Install the Bell Nut to secure into place.
(fig. 20.6)
B: Place Steel Cupola Mount and Bell diagonally across the top of the Cupola assembly so that each end is
resting on a Cupola Post. Attach using 1 (S10) #8 x 1" Pan Screw per side. (fig. 20.7)
C: Place Cupola Roof onto the Cupola Assembly and attach to each Cupola Post using 4 (S37) #7 x 5/8" Pan
Screw as shown in fig. 20.8 and 20.9.
Fig. 20.6
Bell
Steel Cupola Mount
2X #6 x .5" PS
Fig. 20.9
Cupola
Roof
S37
4X #6 x .5" PS
Bell
Steel Cupola Mount
Steel Cupola
2X #6 x .5" PS
Mount and Bell
Cupola
Post
Hardware
4 x
#7 x 5/8" Pan Screw
S37
2 x
#8 x 1" Pan Screw
S10
Fig. 20.7
Bell
Steel Cupola Mount
2X #6 x .5" PS
Fig. 20.8
4X #6 x .5" PS
roof hidden for
clarity
48
Bell
Steel Cupola Mount
2X #6 x .5" PS
S10
Steel
Cupola
Mount
and Bell
Cupola
Roof
4X #6 x .5" PS
Other Parts
1 x Cupola Mount
1 x Bell
A
4X #6 x .5"
roof hidd
clar
Advertisement
