Playing Recorded Clips; Thumbnail Screen - JVC GY-HM250UG Instructions Manual

Playing Recorded Clips

To play back clips recorded on SD cards, switch to
the Media mode.
Press and hold the [MODE] selection button in
Camera mode to enter Media mode. A thumbnail
screen of the clips recorded on the SD card is
displayed.
You can play back the selected clip on the

thumbnail screen.

Memo :
When an SD card without any clips is inserted,
0
"No Clips" is displayed.
Operation Buttons
Use the operation buttons, on the side control
panel of the camera recorder or the LCD monitor,
to operate the thumbnail screen.
A
B
C
D
.
A [MENU/THUMB] Button
Displays the menu.
0
Press this button to close the menu screen
0
during menu display and return to the
thumbnail screen.
B Cross-Shaped Button (JKHI)
Moves the cursor.
C Set (Play) Button
Sets the values and items. (Confirm)
0
Plays back the selected clip.
0
D [CANCEL/STOP] (Stop) Button
Cancels settings and returns to the previous
screen.
E [LOLUX/3] Button
Switches the OK mark of the clip selected by
0
the cursor.
If an OK mark has been appended, it will be
0
deleted. Otherwise, an OK mark will be
appended.
88
Playing Recorded Clips
F [C.REVIEW/4] Button
0
0
G [ZEBRA/5] Button
Enters the action selection screen.
H [DISPLAY] Button
Switches between the "Standard Screen" and
"Detailed Screen".
I [STATUS] Button
Displays the media information screen.
Thumbnail Screen
"Standard Screen" and "Detailed Screen" are
0
available.
Use the [DISPLAY] button to switch between the
screens.
Thumbnails are displayed in order of recording
0
from the oldest to most recent.
Standard screen
A
E
B
F
G
C
H I
D
E
218G0005
F
.
A SD Card Information
0
0
B Clip Mark
Displays the clip information (properties).
A
B
.
A OK Mark
Clip is appended with OK mark.
Switches the selection status of the clip
selected by the cursor.
Clips being selected are displayed with
check mark.
2015-01-07 07:08:43
OK Mark Select
USER3 USER4 USER5
Displays the status of the inserted SD card,
selected SD card, write-protect switch, and
the need for restoring.
Use the [SLOT A/B] switch to switch slots.
Clips in slot A and B cannot be displayed at
the same time.
W z : Write-protect switch of the SD card
in slot A is set.
: SD card in slot B needs to be
S
restored or formatted, or is an
unsupported SD card.
K
J
I
H
G
Actions
E
D
C