Appending/Deleting Ok Mark - JVC GY-HM250UG Instructions Manual

3 Select [Delete Clips] B [This Clip] and press
the Set button (R).
A screen to confirm deletion appears.
This Clip
Selected Clips
All Clips
.
4 Select [Delete] using the cross-shaped
button (JK), and press the Set button (R).
Deleting starts.
Delete This Clip?
Delete
Cancel
Deleting...
Stop
.
Selecting and Deleting Multiple Clips
To select and delete multiple clips, refer to
"[Selecting and Performing Operations on Multiple
Clips] (A P 94)".
Deleting All Clips
Delete all clips that are displayed.
1 Press the [ZEBRA/5] button.
The action selection screen is displayed.
2 Select [Delete Clips] B [All Clips].
A screen to confirm deletion appears.
3 Select [Delete] and press the Set button
(R).
Deleting starts.
Memo :
The time taken to delete clips depends on the
0
number of clips to be deleted.
Appending/Deleting OK
Mark
You can append OK marks to the clips for
0
important scenes.
Clips appended with OK marks cannot be
0
deleted, thus protecting the important clips.
When the camera recorder is in Media mode,
0
3
you can delete the OK marks appended during
recording, or append/delete OK marks after
shooting.
4
.
During Thumbnail Screen
1 Press the [LOLUX/3] button.
If the clip does not have an OK mark, an OK
0
mark will be appended.
If the clip is appended with an OK mark, the
0
OK mark will be deleted.
.
OK Mark
93
Deleting Clips