Table of Contents
Advertisement
REMOTE Zoom Ease
For specifying whether to zoom in or zoom out
slowly when zoom operation starts or during
zooming using a wired remote control.
Off:
0
Disables zoom ease.
1:
0
Enables zoom ease.
2:
0
Enables zoom ease. (Maximum zoom speed is
about half of that in "1")
[Setting Values: ROff, 1, 2]
Caution :
To speed up zoom operation when the setting is
0
configured to "1" or "2", this can be done by
pressing the zoom lever on the remote control
unit all the way to cancel the zoom ease mode.
However, cancellation of the zoom ease mode
is not possible on some remote control unit
models and in some settings.
Expanded Focus
For specifying the operation when any of the
[USER1]-[USER9], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to
"Expanded Focus".
Limited Time:
0
Activates the timer.
During autofocus, the [Expanded Focus] feature
turns off about 3 seconds after it is turned on.
During manual focus, the [Expanded Focus]
feature turns off about 3 seconds after you stop
operating the focus ring.
Momentary:
0
The "Expanded Focus" function is enabled
during the interval while the user button
assigned with "Expanded Focus" is pressed.
Toggle:
0
Pressing the user button assigned with
"Expanded Focus" each time switches the
"Expanded Focus" function to on or off.
[Setting Values: Limited Time, Momentary,
RToggle]
Memo :
When "Toggle" is selected after assigning the
0
expanded focus to any of the [LCD KEY▲]/[LCD
KEY▶]/[LCD KEY▼]/[LCD KEY◀] buttons,
press the [CANCEL/STOP] button if you want to
disable the function.
Camera Process Menu
Menu screen for adjusting the quality of camera
images.
This item cannot be selected in the Media mode.
Detail
For adjusting the contour (detail) enhancement
level.
Increasing the value increases the sharpness of
the contour.
[Setting Values: -10 to +10, Off (R0)]
9 Adjust...
For specifying the detailed settings of the contour
(detail).
(A P110 [Detail/Adjust Item] )
Memo :
This item cannot be selected when [Detail] is set
0
to "Off".
Master Black
For adjusting the pedestal level (master black) that
serves as the reference black.
Increasing the value increases the pedestal.
[Setting Values: -50 to +50 (R-3)]
Black Toe
Process the dark areas according to the balance of
bright and dark areas in the image to adjust the
overall balance of contrast.
For altering the gain of dark areas. Adjust this item
according to the condition of the captured video
signals.
Stretch:
0
Increases the gain of dark areas in an image to
stretch the signals of these areas only, thereby
showing the contrast between bright and dark
areas more clearly.
Specify the amount of stretch with [Stretch
Level].
Normal:
0
Normal condition.
Compress:
0
Compresses the gain of dark areas to increase
the contrast when the entire image appears
bright and contrast is weak. Specify the
compression amount with [Compress Level].
[Setting Values: Stretch, RNormal, Compress]
Memo :
When [WDR] is set to other than "Off", this item
0
appears as "---" and cannot be selected.
Camera Function Menu
107
Advertisement
Chapters
Table of Contents
