Playing Recorded Clips; Thumbnail Screen - JVC Connected Cam GY-HC550U Instructions Manual

Playing Recorded Clips

To play back clips recorded in a recording media,
switch to the Media mode.
Press and hold the [MODE] selection button in the
Camera mode to enter the Media mode. A
thumbnail screen of the clips recorded on the
recording media is displayed.
You can play back the selected clip on the

thumbnail screen.

Memo :
When a recording media without any clips is
0
inserted, "No Clips" is displayed.
Operation Buttons
Use the operation buttons on the side control panel
or front side of the camera recorder to operate the
thumbnail screen.
DISPLAY STATUS
I
H
.
A [MENU/THUMB] Button
Displays the menu.
0
Press this button to close the menu screen
0
during menu display and return to the
thumbnail screen.
B Cross-Shaped Button (JKHI)
Moves the cursor.
C Set (Play) Button
Sets the values and items. (Confirm)
0
Plays back the selected clip.
0
D [CANCEL] (Stop) Button
Cancels settings and returns to the previous
screen.
E [FOCUS ASSIST/1] Button
Switches the OK mark of the clip selected by
0
the cursor.
If an OK mark has been appended, it will be
0
deleted. Otherwise, an OK mark will be
appended.
E F G
FOCUS ASSIST/1 OIS/2 ONLINE/3
TIME CODE
AE LEVEL
MENU/THUMB
CANCEL
A D B C
F [OIS/2] Button
Switches the selection status of the clip
0
selected by the cursor.
Clips being selected are displayed with
0
check mark.
G [ONLINE/3] Button
Enters the action selection screen.
H [DISPLAY] Button
Switches between the "Standard Screen" and
"Detailed Screen".
I [STATUS] Button
Displays the media information screen.
Thumbnail Screen
"Standard Screen" and "Detailed Screen" are
0
available.
Use the [DISPLAY] button to switch between the
screens.
Thumbnails are displayed in order of recording
0
from the oldest to most recent.
Standard screen
A
B
C
D
E
F
.
A Recording Media Information
Displays the status when repair is required for
0
the selected recording media or the status of
the write-protect switch for the SD card.
The inserted recording media will not be
0
displayed if [System] is different.
Use the [SLOT SEL] button to switch
0
between slots A and B. Clips from different
slots cannot be displayed at the same time.
W z : Write-protect switch of the SD card
in slot A is set.
: SD card in slot B needs to be
S
restored or formatted, or is an
unsupported SD card.
G : SSD media in [EXT.SLOT]
Playing Recorded Clips
K
J
I
H
G
97