Changing Connection Setup - JVC GY-HM250UG Instructions Manual

Changing Connection Setup

You can change the settings for each of the preset
items on the [Wizard] screen of the camera
recorder.
If all the items cannot be displayed in a single
0
page, scroll down to display the remaining
items.
Items that cannot be changed are grayed out
0
according to the type of adapter connected and
the mode of connection.
HM250
.
A Type of Adapter Connected
B Mode of Wireless LAN Connection
C [Search Access Point] Button
Tap (click) to display a list of the detected
access points.
The currently selected access point is indicated
by a dot mark ( 0 ).
Search Access Point
HM250
Cancel
.
D Settings on the [Select Setup Type] Screen
A
.
E Settings on the [IP Address Configuration]
B
Screen
When "DHCP" is selected, all items will be
C
grayed out.
D
.
F Settings when using cellular adapter
G Settings on the [Select FTP Proxy] Screen
H [OK]/[Cancel] Button
After changing of settings is complete, tap
(click) the [OK] button.
On the confirmation screen, tap (click)
[Execute] to change the settings on the camera
recorder and restart the network.
Configuring Settings via a Browser n
E
F
G
H
179