Adjusting The White Balance - JVC GY-HM250UG Instructions Manual

Adjusting the White
Balance
Adjust the white balance according to the color
temperature of the lighting. You can select the
adjustment mode according to the shooting
conditions.
As the color of the light (color temperature) varies
according to the light source, it is necessary to
readjust the white balance when the main light
source illuminating the subject changes.
.
Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
1 Press and hold the [FULL AUTO] button to
set Full Auto mode to off.
2 Assign "FAW" (Full Auto White Balance) to
one of the three [WHT.BAL B/A/PRST]
switches.
You can set the Full Auto White Balance
0
feature to either "A", "B", or "PRST" in
[Camera Function] B [FAW].
(A P103 [ FAW ] )
If the position assigned with "FAW" is
0
selected using the [WHT BAL B/A/PRST]
switch, the Automatic White Balance mode is
enabled and an appropriate white balance is
automatically adjusted according to the color
temperature of the lighting on the subject.
Caution :
The accuracy of [FAW] is inferior to that of [AWB]
0
(Auto White Balance).
When the power of the camera recorder is
0
turned on with the [FAW] mode selected, it takes
about 15 seconds for the colors to stabilize.
64

Adjusting the White Balance

Memo :
Pressing and holding the [FULL AUTO] button
0
to enter the Full Auto mode also activates the
Automatic White Balance mode. In this case, the
Iris, Gain and Shutter also enter into Auto mode
forcibly.
Switching of the white balance with the
0
[WHT.BAL B/A/PRST] switch is disabled in the
Full Auto mode.
When [Camera Function] B [User Switch Set] B
0
[AE/FAW Lock] is set to "AE/FAW" or "FAW", the
white balance when the user button that is
assigned with [AE/FAW Lock] is pressed can be
fixed while in the Automatic White Balance
mode.
(A P106 [ AE/FAW Lock ] )
If [White Balance] is assigned to the user button,
0
pressing the assigned user button will display
the FAW Paint Adjustment screen.
(A P42 [Assignment of Functions to User
Buttons] )
FAW Paint Adjustment
You can fine-adjust the white balance that was
automatically adjusted.
1 Select [Camera Process] B [White
Balance] B [FAW Paint] and press the Set
button (R).
The FAW Paint Adjustment screen appears.
White Balance
FAW Paint
.
2 Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.
1
R
B