JVC GY-HM250UG Instructions Manual page 143

W Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
*
.
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Example of user's bit display:
0
F F EE DD 20
.
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
(A P115 [ TC/UB ] )
X Time Code Lock Indicator
When the built-in time code generator is
synchronized with the external time code data
input, Z lights up.
Y Live streaming mark n
When [System] B [Network]/[Settings] B [Live
Streaming Set] B [Live Streaming] is set to
"On", the distribution status is displayed.
(A P128 [ Live Streaming ] )
Icon
Distribution in progress (good
connection quality)
.
(Red)
Distribution in progress (poor
connection quality)
.
(Red)
Connection pending or
connection failed
.
(Yellow)
Z Event/Warning Display Area
Displays error messages.
(A P198 [Error Messages and Actions] )
Status
a Media Status
---- : No card found in the selected
slot
STBY : Recording standby
: Recording
RREC
REVIEW : Clip Review
(A P77 [Viewing Recorded Videos Immediately
(Clip Review)] )
: Pre Rec recording standby
STBY P
(A P82 [Pre Rec] )
: Pre Rec recording
RRECP
(A P82 [Pre Rec] )
: Clip Continuous Rec recording
STBY C
standby
(A P83 [Clip Continuous Rec] )
: Clip Continuous Rec recording
RRECC
(A P83 [Clip Continuous Rec] )
: Clip Continuous Rec recording
STBYC
pause
(displayed in
yellow)
(A P83 [Clip Continuous Rec] )
: Interval Rec recording standby
STBY N
(A P86 [Interval Rec] )
: Interval recording pause
STBYN
(displayed in
red)
: Interval Rec recording
RRECN
(A P86 [Interval Rec] )
: Frame Rec recording standby
STBY M
(A P85 [Frame Rec] )
: Frame Rec recording
RRECM
(A P85 [Frame Rec] )
: Frame Rec recording pause
STBYM
(displayed in
yellow)
(A P85 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
b Dual Rec/Backup Rec Display
"DUAL" is displayed in the Dual Rec mode and
"BACKUP" is displayed in the Backup Rec
mode.
(A P126 [ Slot Mode ] )
Memo :
This item is not displayed when [Slot Mode] is
0
set to "Series".
This item is not displayed when [LCD/VF] B
0
[Display Settings] B [Media Remain] is set to
"Off". However, warnings will be displayed.
(A P115 [ Media Remain ] )
Displayed in the Display 0 and Display 1 screens
0
during warnings only. (When the remaining time
is shorter than 3 minutes)
Display Screen in Camera Mode
143