Playing Recorded Clips - JVC GY-HC900CHU Instructions Manual

Playing Recorded Clips

To play back clips recorded on SD cards, switch to
the Media mode.
Press and hold the [CAM/MEDIA] selection button
in the Camera mode to enter the Media mode. A
thumbnail screen of the clips recorded on the SD
card is displayed.
You can play back the selected clip on the
thumbnail screen.
Memo :
When an SD card without any clips is inserted,
0
"No Clips" is displayed.
Viewing Recorded Videos
Use the operation buttons on the side control panel
of the camera recorder to play back.
.
A [STATUS/SET] Button (R)
Plays back/pauses the clip pointed by the
0
cursor.
You can press the cross-shaped button (HI)
0
to perform frame-by-frame forward playback
during pause mode.
B Cross-shaped Button (JKH I)
[J/K] Button:
0
Skips in the reverse or forward direction.
[H/I] Button:
0
During Playback:
0
Fast forwards in the reverse or forward
direction.
While paused:
0
Frame-by-frame playback in the reverse
or forward direction.
C [CANCEL/RESET] Button
Stops playback.
26
Playing Recorded Clips
1 In the thumbnail screen, move the cursor to
the clip to be played back.
Move the cursor to the clip to be played back
using the cross-shaped button (JKH I).
2 Tap the [STATUS/SET] button (R).
Playback of the selected clip starts.
Audio Output during Playback
You can confirm the playback sound from the
0
monitor speaker, or the headphone connected
to the [PHONE] terminal. When a headphone is
connected to the [PHONE] terminal, sound
cannot be output from the monitor speaker.
Adjust the volume of the monitor speaker or
0
headphone using the [MONITOR] volume
adjustment knob.
Displaying Information during Shooting
Pressing the [DISPLAY] button during playback
displays the display screen.
Pressing the [USER4] button during shooting
switches the display information between camera
information display, GPS display and turning off the
display.
C
B
A