System Menu; Record Set; Media; Setup File - JVC GY-HM250UG Instructions Manual

4к memory card camera recorder
Hide thumbs Also See for GY-HM250UG:
Table of Contents

Advertisement

Alarm Level
For selecting whether to turn on the warning tone
as well as setting the volume.
The warning tone is output from the monitor
speaker or [x] terminal.
[Setting Values: High, Low, ROff]
Test Tone
For specifying whether to output the audio test
signals (1 kHz) during color bar output.
[Setting Values: On, ROff]
Audio On FULL AUTO
For setting whether to enable Auto for audio when
Full Auto is enabled using the [FULL AUTO] button.
SW Set:
0
The audio recording mode follows the settings
below.
When the handle unit is connected: Follows
0
the [AUDIO SELECT CH-1 AUTO/MANU] or
[AUDIO SELECT CH-2 AUTO/MANU] switch
setting.
When the handle unit is not connected:
0
Follows the MENU setting (AUTO/MANUAL
in the audio level setting).
Auto:
0
Sets audio recording mode to the forced auto
mode.
[Setting Values: SW Set, RAuto]

System Menu

This menu screen allows system-related settings.
For specifying recording settings, formatting and
restoring of SD card, tally lamp settings, network
settings, date/time, time zone, and other settings.
It can also be used to reset the menu settings to
their default values.

Record Set...

For specifying recorded video-related settings.
(A P123 [Record Set Item] )

Media

9 Format Media
For formatting (initializing) an SD card.
Select a card slot (A or B), select [Format] from
[Cancel]/[Format], and press the Set button (R) to
format (initialize) the card.
(A P45 [Formatting (Initializing) SD Cards] )
9 Restore Media
For restoring an SD card.
Select a card slot (A or B), and press the Set button
(R) to restore the SD card.
(A P46 [Restoring the SD Card] )
Memo :
This item appears only when the SD card needs
0
to be restored. However, it is not selectable
when recording in Camera mode and during Clip
Review.

Setup File

This allows you to save the menu settings as well
as the performance results of shutter speed and
AWB.
It is useful to save settings according to different
shooting conditions.
9 Load File...
Loads the settings.
(A P151 [Loading a Setup File] )
9 Store File...
Saves the settings.
(A P150 [Saving Setup Files] )
121
A/V Set Menu

Advertisement

Table of Contents
loading

Table of Contents