Side Terminal Section; Rear Terminal - JVC GY-HM250UG Instructions Manual

Side Terminal Section

A
.
A [HOST] USB Host Terminal n
For connecting an USB adapter according to
the intended purpose when you are connecting
the unit to a network.
(A P157 [Camera Setup for Network
Connection] )
B [DEVICE] USB Mini Terminal
(A P154 [Loading Clips to the PC] )
C [HDMI] HDMI Output Terminal
(A P152 [Connecting External Monitor] )
D [SDI OUT] SDI Output Terminal n m
(A P117 [ Rec Trigger ] )
(A P152 [Connecting External Monitor] )

Rear Terminal

GY-HM250U/GY-HM250E
A
H G F E
.
24
Names of Parts
GY-HM180U/GY-HM180E
GY-HM170U/GY-HM170E
A
B
C
D
.
A [BATTERY] Terminal
B [BATT. RELEASE] Battery Lock Release Button
(A P33 [Removing the Battery] )
C [REC] Record Trigger Button
Starts/stops recording.
0
(A P49 [Basic Shooting Procedures] )
You can change its function in the menu.
0
Memo :
This button is interlocked with the [REC/HOLD]
0
record trigger button I on the the handle unit.
D [DC] DC Input Terminal
Input terminal for DC 12 V power supply. For
connecting with the supplied AC adapter.
(A P34 [Using AC Power (DC IN Power)] )
E [REMOTE] Remote Terminal
(A P154 [Connecting Wired Remote Control] )
F [AUX] AUX Input Terminal (Φ3.5 mm)
For connecting to receiver such as wireless
microphone.
(A P69 [Audio Recording] )
G [x] Headphone Jack (Φ3.5 mm)
(A P71 [Monitoring Audio Sound During
Recording Using a Headphone] )
B
H [AV] AV Output Terminal
C
(A P152 [Connecting External Monitor] )
D
H G F E
B
C
D