Adjusting The Viewfinder - JVC GY-HM250UG Instructions Manual

Adjusting the Viewfinder

You can change the brightness and peaking of the
viewfinder screen according to your usage
conditions.
Changing the brightness of the screen will not
affect the recorded images.
1
3
.
Caution :
A high-definition viewfinder is used on this
0
camera recorder in order to provide an accurate
focusing environment. Due to the characteristic
of the display device, colors may appear on the
images when you blink your eyes. This is not a
malfunction. It does not affect the recorded
images, SDI output, AV output, or HDMI output.
1 Pull out the viewfinder.
2 Incline the viewfinder vertically to a
position that enables easy viewing.
3 Adjust the visibility using the visibility
adjustment lever.
Adjust the visibility adjustment lever to sharpen
the image on the viewfinder screen.
4 Adjust the brightness, contour, and
contrast of the viewfinder screen.
Use the [VF Bright] menu to adjust the
0
brightness of the viewfinder screen.
[LCD/VF] B [VF Bright]
(A P112 [ VF Bright ] )
Use the [LCD/VF Peaking] menu to adjust the
0
contour of the viewfinder.
(The contour of the LCD monitor will also be
adjusted at the same time.)
[LCD/VF] B [LCD/VF Peaking]
(A P112 [ LCD/VF Peaking ] )
Use the [VF Contrast] menu to adjust the
2
0
contrast of the viewfinder screen.
[LCD/VF] B [VF Contrast]
(A P112 [ VF Contrast ] )
Memo :
If [LCD/VF] B [VF SW] is set to "Enable", pull out
0
the viewfinder before making any adjustment.
(A P112 [ VF SW ] )
Displaying in Black and White
You can display the viewfinder screen in black
and white.
[LCD/VF] B [VF Color] item B Press Set
0
button (R) B Select "Off" B Press Set button
(R).
(A P112 [ VF Color ] )
Adjusting the LCD Monitor and Viewfinder
41