Playing Recorded Clips - JVC Connected Cam GY-HC550E Instructions Manual

4k memory card camera recorder
Hide thumbs Also See for Connected Cam GY-HC550E:
Table of Contents

Advertisement

Playing Recorded Clips

To play back clips recorded in a recording media,
switch to the Media mode.
Press and hold the [MODE] selection button in the
Camera mode to enter the Media mode. A
thumbnail screen of the clips recorded on the
recording media is displayed.
You can play back the selected clip on the
thumbnail screen.
Memo :
When a recording media without any clips is
0
inserted, "No Clips" is displayed.
Use the operation buttons on the side control panel
or front side of the camera recorder to operate the
thumbnail screen.
Playing back
Use the operation buttons on the side control panel
of the camera recorder to play back.
.
A Set Button (R)
Plays back/pauses the clip pointed by the
0
cursor.
You can press the cross-shaped button (HI)
0
to perform frame-by-frame forward playback
during pause mode.
B Cross-shaped Button (JKH I)
[J/K] Button:
0
Skips in the reverse or forward direction.
[H/I] Button:
0
During Playback:
0
Fast forwards in the reverse or forward
direction.
While paused:
0
Frame-by-frame playback in the reverse
or forward direction.
C [CANCEL] Button
Stops playback.
28
Playing Recorded Clips
1 In the thumbnail screen, move the cursor to
2 Press the Set button (R).
Audio Output during Playback
0
0
Displaying Information during Shooting
During playback, pressing the [DISPLAY] button
shows the display screen. Pressing the
[ONLINE/3] button during shooting switches the
display information between camera information
display, GPS display and turning off the display.
FOCUS ASSIST/1
OIS/2
ONLINE/3
A
TIME CODE
AE LEVEL
MENU/THUMB
B
CANCEL
C
GAIN
WHT BAL
SHUTTER
the clip to be played back.
Move the cursor to the clip to be played back
using the cross-shaped button (JKH I).
Playback of the selected clip starts.
You can confirm the playback sound from the
monitor speaker, or the headphone connected
to the [x] terminal. When a headphone is
connected to the [x] terminal, sound cannot be
output from the monitor speaker.
Adjust the volume of the monitor speaker and
headphone using the [MONITOR +/-] volume
adjustment button on the LCD monitor section
of the camera recorder.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents