JVC GY-HM250UG Instructions Manual page 115

Record Format
For setting whether to display the video format
during recording or playback.
[Setting Values: ROn, Off]
Media Remain
For setting whether to display the remaining space
of the recording SD card.
[Setting Values: ROn, Off]
Memo :
When the remaining space warning is
0
displayed, the information appears even when
"Off" is selected.
The displayed time is an estimate.
0
TC/UB
For specifying whether to display the time code
(TC) or user's bit (UB) rate in the display on the LCD
monitor and viewfinder screen.
[Setting Values: UB, RTC, Off]
Histogram
For setting whether to display the histogram, which
shows the distribution of different points with
different levels of brightness in an image.
[Setting Values: On, ROff]
Memo :
When the histogram is displayed, the audio level
0
meter display is turned off temporarily.
9 Top
For selecting the maximum brightness limit for
changing the histogram display color.
[Setting Values: 5% to 110% (in 5% increments)]
(R 80%)
9 Bottom
For selecting the minimum brightness limit for
changing the histogram display color.
[Setting Values: 0% to 105% (in 5% increments)]
(R 20%)
Audio Meter
For specifying whether to display the audio level
meter on the LCD monitor and viewfinder screen.
[Setting Values: ROn, Off]
Battery
For setting the display of the remaining battery
power in the display on the LCD monitor and
viewfinder screen.
The battery information appears only on the
Display 2 screen in Camera mode.
(A P139 [Display 2 screen] )
Time:
0
Displays the remaining battery power in
minutes. (min)
Capacity%:
0
Displays the remaining battery power in
percentage. (%)
Voltage:
0
Displays the current battery voltage in units of
0.1 V. (V)
Off:
0
The remaining battery power is not displayed.
[Setting Values: RTime, Capacity%, Voltage, Off]
Memo :
The battery mark that appears before the "Time",
0
"Capacity%" or "Voltage" value changes according to
the remaining battery power.
In addition, the plug mark is added during charging.
: 10 % and below
4 S
: 11 % to 30 %
D R
: 31% to 70 %
C Q
: 71 % to 100 %
B P
When the remaining battery power is low, "RES"
0
instead of the value is displayed.
Replace the battery as soon as possible.
The remaining battery power and remaining time are
0
intended as reference values for the shooting
duration.
The time, capacity or voltage will not be displayed
0
during charging.
Date/Time
For specifying whether to display the date and time
in the display on the LCD monitor and viewfinder
screen.
[Setting Values: ROn, Off]
Date Style
For setting the date display sequence for display
on the LCD monitor and viewfinder screen as well
as for time stamp recording.
Display examples of the setting values are as
follows.
DMY2: 30 Jun 2020
0
DMY1: 30-06-2020
0
MDY2: Jun 30, 2020
0
MDY1: 06-30-2020
0
YMD: 2020-06-30
0
[Setting Values: DMY2, DMY1, MDY1, MDY2,
YMD]
(Default values: MDY2 (U model), DMY1 (E
model))
115
LCD/VF Menu