Table of Contents
Advertisement
Module programming
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
1
Wait until the LED turns ON solid red.
Press unlock on the OEM FOB then insert key into key switch and turn ignition ON. The LED
2
flashes green.
3
Wait for LED to turn solid green for 3 seconds then OFF.
4
Turn the ignition OFF.
You have successfully completed the module programming sequence.
12
403.VW10 2.00 2008 Volkswagen GTI
©2022 VOXX•DEI LLC. All rights reserved.
Advertisement
Table of Contents
Need help?
Do you have a question about the 403.VW10 and is the answer not in the manual?
Questions and answers