Directed DB3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DB3
  6. Installation manual

Directed DB3 Installation Manual

Databus all interface module for dodge journey 2013; ram journey 2013 (smart key); 403.chrysler3 4.22
Hide thumbs Also See for DB3:

Advertisement

Table of Contents

See also: Installation Manual
INSTALLATION GUIDE
DB3
2013 Dodge/Ram Journey (Smart Key) - 403.CHRYSLER3 4.22
Designed by Installers for Installers
© 2017 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DB3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Directed DB3

Summary of Contents for Directed DB3

  • Page 1 2013 Dodge/Ram Journey (Smart Key) - 403.CHRYSLER3 4.22 Designed by Installers for Installers © 2017 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...
  • Page 2 Contents Introduction Pre-installation and application warnings Installation Wiring diagram Vehicle connections Connecting the module Module programming LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty Quick reference guide...
  • Page 3 The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.

  • Page 4: Introduction

    Introduction DB3 is an all-in-one door lock and override module. Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. This solution is compatible with the 2013 Dodge/Ram Journey (Smart Key) and offers the following features: •...

  • Page 5: Pre-Installation And Application Warnings

    HS CAN connections are required for heated seats. Additional parts required (maximum required): Resistor 100Ω Fuse 7.5A Diode 6A 0 x Fuse 0 x 1A Diodes 0 x Resistor 0 x Relay 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-11-23 Directed. All rights reserved.

  • Page 6: Obdii

    Not Connected: Orange/Black (at Headlight Switch) (+) 12V: Parking Light (MUX): Red or Red/Yellow, White/Brown or pin 3 White/Lt. Green, pin 3 Black Connector (at Headlight Switch) 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-11-23 Directed. All rights reserved.

  • Page 7: Wiring Diagram

    Immo. Data (veh. side): Yellow/Black: 10 (+) 12V: Parking Light (MUX): Red or Red/Yellow, White/Brown or pin 3 White/Lt. Green, pin 3 Black Connector (at Headlight Switch) 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-11-23 Directed. All rights reserved.

  • Page 8: Installation

    No Connection No Connection H2/9 Violet/Brown (MUX) Parking Lights Output H2/10 Yellow/Black Immo. Data (veh. side) H2/11 Orange/Black No Connection No Connection H2/12 Blue/Red No Connection No Connection 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-10 Directed. All rights reserved.

  • Page 9: Connector

    H4/2 Black (-) Ground H4/3 Blue (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 RF Loop H5/2 RF Loop 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-10 Directed. All rights reserved.

  • Page 10: Connecting The Module

    (D2D) (10-pin) (14-pin) W2W installation If required: Connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module. (12-pin) (10-pin) (14-pin) 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-11-16 Directed. All rights reserved.

  • Page 11: Module Programming

    Press the PTS button once more to turn the ignition OFF once the module is successfully programmed. You have successfully completed the module programming sequence. 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-10 Directed. All rights reserved.

  • Page 12: Led Diagnostics And Troubleshooting

    Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-10 Directed. All rights reserved.
  • Page 13 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-10 Directed. All rights reserved.

  • Page 14: Soft Reset

    (14-pin) Wait 3 seconds until the LED turns ON solid orange then release the programming button. & & The LED turns ON solid red. Solid Release Solid 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-12-01 Directed. All rights reserved.

  • Page 15: Hard Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-12-01 Directed. All rights reserved.

  • Page 16: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2016-07-26 Directed. All rights reserved.

  • Page 17: Feature And Option List

    Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-10 Directed. All rights reserved.

  • Page 18: Limited One Year Consumer Warranty

    This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.

  • Page 19: Quick Reference Guide

    This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securily. 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-05 Directed. All rights reserved.
  • Page 20 Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. 403.CHRYSLER3 4.22 2013 Dodge/Ram Journey (Smart Key) © 2017-01-05 Directed. All rights reserved.

Table of Contents

Save PDF