Table of Contents
Advertisement
GLOB Menu Reference
The GLOB menu stores all of the radio-wide settings used by the
scanner. The GLOB menu allows you to "tweak" these settings to
your liking. The default settings will work fine for most users, but
most users will want to use the GLOB menu to personalize the
radio to suit their individual tastes. The active parameter is
always the middle parameter and is indicated by a flashing ":".
The entire GLOB menu is shown below. Note that some GLOB
parameter changes do not take effect until the GLOB menu is
saved.
HINT:
You can restore all GLOB settings to their defaults without affecting
press
confirm the GLOB parameter reset.
GLOB
Parameter
CONTRAST
Owner
Clone Send
Alert Mode
Sound Mode
Key Beeps
Light Mode
Light Level
Dim LED
PSR-600 User Manual
Page
your programmed objects or V-Scanners. Power cycle the radio, then
0
2
, then
during the welcome message display. Press
Options
Sets LCD contrast. Use keys on 5-way
1-7
pushbutton pad.
Enters sub menu to set Welcome Message text
SEL
display.
SEL
Press
Controls the ALERT LED and Audible Alarm
behavior. Both allows the LED and Tone. Tone
Both, Tone, Light, Off
allows the audible alarm only. Light allows the LED
only. Off deactivates the ALERT LED and Audible
Alarm feature.
On or Stlth
Controls all radio beeps.
On or Off
Controls key beeps.
Controls the backlight operation.
Norml, Stlth
backlight to remain on all the time.
disables the backlight.
Controls backlight intensity. When Dim LED is set
Brit, Dim, Off
to Yes, also controls Alert LED intensity. Accessed
from front panel using
When On, DIM key and Light Level GLOB menu
On or Off
parameter also control intensity of Alert LED.
Description
SEL
to send data using clone mode
DIM
key.
ENT
to
Norml
causes the
Stlth
(Steath)
99
Advertisement
Table of Contents
