Table of Contents
Advertisement
to those objects that are being used to provide communications
for the incident you are trying to monitor.
Permanent Lockout
Permanent lockout locks out an object until you explicitly unlock
it. No traffic will be received on the locked out object while
permanent lockout is active.
To apply permanent lockout to an object, press
OUT
operation, or navigate to an object using the 5-way pushbutton
pad while in Manual Mode or PGM mode and press
the
uppercase to indicate that permanent lockout is applied to the
object:
If you wish to remove permanent lockout from an object,
navigate to the object using the 5-way pushbutton pad while in
Manual Mode or PGM mode and press
HINT:
in Program mode by pressing
Search Lockout
Search lockout works with certain search objects, including
LMIT searches, some SRVC searches, and SWPR objects.
Frequency lockout is used to lock out undesired frequencies that
are found during searches.
To apply search lockout during a search, press the FrL/O
softkey while the scanner is stopped on the undesired frequency:
PSR-600 User Manual Page
key while the scanner is stopped on that object during scan
L/OUT
key. The lowercase "l" in the display changes to
You can also toggle lockout anytime you are viewing an object menu
FUNC
FUNC
FUNC
L/OUT
, then
L/OUT
.
L/
, then the
, then
again.
63
Advertisement
Table of Contents
