Table of Contents
Advertisement
3. Once you have verified that the device has been properly installed, you may now proceed to
use the USB-to-CAN Converter to connect to CAN devices. Attach the CAN device to the CAN
port of the adapter and then connect the USB connector to the USB port of your computer. Use
the supplied driver for the serial device if needed.
Uninstalling the Device Driver
It is easy to uninstall the USB to Serial device driver:
1. Control Panel -> Add or Remove Programs.
2. Click the "Remove" button. Afterward, the uninstall procedure will show the dialog below. Click
the "Yes" and "Yes to All" button to remove the driver of the tM-7565.
3. Finally, the uninstall procedure will show a dialog box to notify you that the driver was removed
successfully. Click the "Ok" button to finish the uninstall procedure.
I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved
E-mail: service@icpdas.com
80
Page：
Advertisement
Table of Contents
