ICP DAS USA tM-7565 User Manual page 15

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

The I-7565/tM-7565 provides CAN and USB slave communication interfaces. On the USB

interface, the I-7565/tM-7565 provides the virtual COM driver. Users can use the I-7565/tM-7565

instead of the I-7530 if the device only have USB host interface. The I-7565/tM-7565 is powered

by the USB interface, it doesn't need external power. The isolator of the I-7565/tM-7565 is on the

CAN side.

Figure: The block diagram of the I-7565/tM-7565

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

Page：

E-mail: service@icpdas.com

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all