ICP DAS USA tM-7565 User Manual page 62

3. Once you have verified that the device has been properly installed, you may now proceed to
use the USB-to-CAN Converter to connect to CAN devices. Attach the CAN device to the CAN
port of the adapter and then connect the USB connector to the USB port of your computer. Use
the supplied driver for the serial device if needed.
Uninstalling the Device Driver
It is easy to uninstall the USB to Serial device driver:
1. Run the DRemover98_2K.exe Uninstall program which can be found on the
\CAN\Converter\I-7565\driver
ftp://ftp.icpdas.com/pub/cd/can_cd/can/converter/i-7565/driver
2. The uninstall program will then prompt you whether you want to remove the utility program.
Click " OK " to continue.
3. After the uninstall is complete, the program will prompt you to restart Windows. Click "Yes" to
continue.
4. Windows will show a dialog box to notify you that the driver was removed successfully. Wait for
Windows to restart your computer.
I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved
or at
E-mail: service@icpdas.com
Package CD,
62
Page：