ICP DAS USA tM-7565 User Manual page 66

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

According to the above calculation, the three Bit Time registers are as following:

Bit Timing 1 register value is

Bit Timing 2 register value is

Bit Timing 3 register value is

Then, the users can fill those parameter values as below:

Note:

1. After setting down, users must click "Calculate" button and calculate CAN Baud rate,

otherwise CAN Converter utility could not save the parameter.

2. The function only supports on firmware version 3.00 or more in I-7530 series and I-7565.

If the users do not know how to fill these parameter values, please feel free to contact us.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

0x30.

0x04.

0x7E.

E-mail: service@icpdas.com

Page：

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all