ICP DAS USA tM-7565 User Manual page 17

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

The pin assignments of the CAN port (DB9 male) on the I-7530 series including I-7530, I-7530T,

I-7530-FT, I-7530A, and I-7565 follows both the CANopen DS102 profile and the appendix C of

the DeviceNet specifications. The wire connections are as follows.

Figure: The CAN Bus wire connection to the I-7530 series

The tM-7530 uses spring type connector on the CAN interface. The wire connection to the

tM-7530 is below.

Figure: The CAN Bus wire connection to the tM-7530

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

Page：

E-mail: service@icpdas.com

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all