ICP DAS USA tM-7565 User Manual page 79

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

Verifying the Installation

This section will show you on how to verify whether the tM-7565 was properly installed. You will

also need to determine the virtu

converter.

Note:

Before you connect the tM-7565 for the first time, ensure that you do not attach any serial

devic

es to the converter. You must only connect the tM-7565 by itself.

To verify whether the device is properly installed and determine the COM port assignment for the

device:

1. Click

"Start"  "Settings"  "Control Panel", then double click on the "System"

System

Properties window is display, click on

Manager"

button. Double-click on Ports (COM & LPT). If the device was correctly installed, you

should now see the tM-7565 Converter device listing. This also means that Windows has

assigned the device to the COM3 port.

2. If you need to reassign the virtual COM Port name to another Port number, you can

double-click on the device (tM-7565) to view the properties.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

al COM port assignment made by Windows for the USB to CAN

" Hardware"

tab and then click on the

E-mail: service@icpdas.com

icon. Once the

"Device

Page：

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all