ICP DAS USA tM-7565 User Manual page 21

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

Status

JP4 position

Enable (default)

(Activate)

I-7565

Disable (Deactivate)

There is no terminator resistor in the tM-7530. Therefore, if users would like to use terminator

resistor, it is necessary to wire a 120Ω resistance on the CAN bus, as following figure.

The terminator resistor is built in the tM-7530A. If users would like to enable terminator resistor of

the tM-7530A, please let the CAN_H pin and the TR pins be shorted to each other, as following

figure.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

Page：

E-mail: service@icpdas.com

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all