ICP DAS USA tM-7565 User Manual page 29

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

The configuration is divided to three areas with different color. They are UART, Communication,

and CAN configuration area.

 UART Configuration:

＊ Baud rate: Set the UART baud rate. Different CAN converters have different max. UART

baud rates. Users can select the proper UART baud for the CAN converters.

＊ Data bit: Set the UART data bit. The CAN converters support 4 kinds of data bit

configuration.

＊ Stop bit: Set the UART stop bit. The CAN converters support 2 kinds of stop bit

configuration.

＊ Parity bit: Set the UART parity bit. The CAN converters support 3 kinds of parity bit

configuration.

＊ Add Checksum: Set the CAN converters to enable or disable the checksum mechanism

in the UART communication. If enable the checksum function, all UART strings from / to

the tM-7530 must append two bytes of the checksum information. For checksum

algorithm,

please refer to the Node in the

＊ Error Response: Set the CAN converters to enable or disable the error response

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

page

38.

E-mail: service@icpdas.com

Page：

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all