ICP DAS USA tM-7565 User Manual page 60

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

Note:

When you finish the driver installation, please unplug the USB cable, and then plug the

USB cable again.

Verifying the Installation

This section will show you on how to verify whether the I-7565 was properly installed. You will

also need to determine the virtual COM port assignment made by Windows for the USB to CAN

converter.

Note:

Before you connect the I-7565 for the first time, ensure that you do not attach any serial

devices to the converter. You must only connect the I-7565 by itself.

To verify whether the device is properly installed and determine the COM port assignment for the

device:

1. Click

"Start"  "Settings"  "Control Panel", then double click on the "System"

System Properties window is display, click on

Manager"

button. Double-click on Ports (COM & LPT). If the device was correctly installed, you

should now see the I-756X Converter device listing. This also means that Windows has

assigned the device to the COM8 port.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

" Hardware"

tab and then click on the

E-mail: service@icpdas.com

icon. Once the

"Device

Page：

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all