ICP DAS USA tM-7565 User Manual page 52

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

I-7565. The tM-7530, tM-7530A, and tM-7565 are always support.

 Example:

Command: P3040000000000000000<CR>

Change the CAN baud rate=125K and acceptance code 0x00000000, acceptance mask

0x00000000 into the CAN Converter module. When CAN Converter module was rebooted,

the CAN parameter will be recovered to the previous setting.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

E-mail: service@icpdas.com

Page：

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all