ICP DAS USA tM-7565 User Manual page 50

The uart to can bus converter

Hide thumbs Also See for tM-7565:

Table of Contents

 Response: A valid command will let the module to apply the RS-232/RS-485/RS- 422/USB

configuration parameters.

Invalid command: ?<Error Code><CR>



Note:

It is necessary to enable the "Error Response" function in the CAN Converter Utility, in order to

receive Syntax and/or communication error information at the host PC.

This function is just supported by the firmware version 3.00 or more in I-7530 series and

I-7565. The tM-7530, tM-7530A, and tM-7565 is always supported.

 Example:

Command: P20B30000<CR>

The module's RS-232/RS-485/RS-422/USB configuration will be changed to the

rate=115.2K, data bit=8, stop bit=1, none parity, no checksum and no error responses. When

CAN Converter module was rebooted, the RS-232/RS-485/RS-422/USB parameter will be

recovered to the previous setting.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5

and tM-7565.

460800 bps baud rate of RS-232, only for I-7565

921600 bps baud rate of RS-232, only for I-7565

Description

E-mail: service@icpdas.com

baud

Page：

Table of Contents

I-7530t I-7530-ft I-7530a I-7565 Tm-7530 Tm-7530a ... Show all