Configuring Parameters; Local Parameters - Bolin Technology EX1030BHD-L5NA User Manual

Configuring Parameters

Local Parameters

Set local parameters for your PC.
NOTE:
•
The local parameters may vary with models, please see the actual Web interface for details.
Select Setup to go into IP camera setting up menu.
1. Select Setup > Common > Basic Info.
It displays the basic information of the camera.
2. Select Setup > Common > Local Settings.
3. Modify the settings as required. The following table describes some major parameters.
A. Video Parameter
a. Processing Mode
i. Real Time Prior: Recommended if the network is in good condition.
ii. Fluent Prior: Recommended if you want short time lag for live video.
iii. Ultra-low Delay: Recommended if you want the minimum time lag for live video.
b. Video Pixel Format
i. Set the video format for images on the PC client.
It is recommended to choose YUV420 if the graphic card of your PC supports it. RGB32 is only
supported by some low-version graphic cards.
c. Protocol
i. Set the protocol used to transmit media streams to be decoded by the PC.
B. Record and Snapshot
a. Recording
i. Subsection By Time: Duration of recorded video for each recording file on the computer. For
example, 2 minutes.
ii. Subsection By Size: Size of each recording file stored on the computer. For example, 5M.
21