Menu System; Activation Of Menu System And Parameter Setting - Yaesu FT-847 Operating Manual

Menu System

The FT-847's Menu system allows customization of many aspects of transceiver performance by the owner. The
parameters adjusted via the Menu system are performance characteristics which do not require adjustment in "real
time" by the operators, but rather are "set-and-forget" parameters which optimize the transceiver's setup configu-
ration for the way you like to operate.
A
CTIVATION OF
The Menu system is easy to activate and set. Use the following procedure:
•
Press the [MENU] key momentarily.
‚
Rotate the SUB-TUNE control to select the Menu
item # to be adjusted.
ƒ
Rotate the MEM/VFO CH control to adjust or se-
lect the parameter to be changed on the Menu item
selected in step
„
After completing your selection and adjustment,
press the [MENU] key once more to exit the Menu
mode and return to normal operation.
Note: If you need to adjust more than one Menu item,
return to step
and repeat this process until you have adjusted
all desired Menu items. Then go to step
exit the Menu mode.
82
M
ENU
‚
above.
‚
after completing step
S P
YSTEM AND
ƒ
above,
„
to
S
ARAMETER ETTING
FT-847 O
PERATING
M
ANUAL