Set The Gps Geodetic Reference System; Select The Built-In Gps Receiver, Or An Externally Connected Gps Device; Set The Gps Position Information Recording Interval - Yaesu FTM-300DR Advance Manual

15 Set the GPS geodetic reference system

Set the geodetic GPS positioning standard reference system.
1. Press and hold the [F(SETUP)] key  [CONFIG]  [15 GPS DATUM]
2. Press the DIAL knob to select the desired setting.
WGS-84
TOKYO MEAN
The default setting: WGS-84
Select "WGS-84" for the normal operation.

16 Select the built-in GPS receiver, or an externally connected GPS device

Choose whether to use the built-in GPS or an external GPS device.
1. Press and hold the [F(SETUP)] key  [CONFIG]  [16 GPS DEVICE]
2. Press the DIAL knob to select the desired setting.
INTERNAL
EXTERNAL
The default setting: INTERNAL
The data transmission speed of the EXT GPS jack is 9600bps and cannot be changed.

17 Set the GPS position information recording interval

Set the time interval for recording GPS position information to the micro-SD card.
1. Press and hold the [F(SETUP)] key  [CONFIG]  [17 GPS LOG]
2. Rotate the DIAL knob to select the time interval
OFF / 1 sec / 2 sec / 5 sec / 10 sec / 30 sec / 60 sec
If OFF is selected, no GPS Information is saved to the microSD memory card.
The default setting: OFF
• Data saved to the microSD memory card is saved in GPSyymmddhhmmss.LOG format.
• Saved data may be viewed by using OEM PC applications*.
* Yaesu does not provide technical support for PC applications.
Positions using the global geodetic reference system. This is
being used as a standard all around the world.
Positions using the Japanese geodetic reference system.
When positioning in Japan (Tokyo), the error can be made
smaller.
Uses built-in GPS.
Uses GPS data from an external GPS device connected to
the EXT GPS jack on the front panel.
54