Table of Contents
Advertisement
GM Function
GM Alert Beep
To alert you to the current status of GM operation, the GM (Group Monitor) feature allows
two kinds of alert beeps (with the additional option of turning them off). Depending on your
location and the potential annoyance associated with frequent beeps, you may choose
the Beep mode which best suits your needs.
1. Press and hold in the [ MHz ( SETUP )] key for
one second, then rotate the DIAL knob to
select "GM RINGR 20".
2. Press the [ MHz ( SETUP )] key, and then ro-
tate the DIAL knob to select one of the fol-
lowing parameters.
IN RANGE: Beeps sound only when the
radio first detects that a station
is within range.
ALWAYS:
Beeps sound every time a
polling transmission is received
from another station.
OFF:
No alert beeps sound.
Default: IN RANGE
3. Press and hold in the [ MHz ( SETUP )] key for
one second to save the new setting and exit
to normal operation.
GM Polling Interval
The GM (Group Monitor) feature may be programmed to poll normal time (default value)
or long time. To change the polling interval:
1. Press and hold in the [ MHz ( SETUP )] key for
one second, then rotate the DIAL knob to
select "GM INTVL 21".
2. Press the [ MHz ( SETUP )] key, then rotate
the DIAL knob to select the desired polling
interval (NORMAL or LONG).
Default: NORMAL
3. Press and hold in the [ MHz ( SETUP )] key for
one second to save the new setting and exit
to normal operation.
22
VOL
SQL
REV
TXPO
D W
VOL
SQL
REV
TXPO
D W
FTM-3207DR/DE Advance Manual
DIAL
D/A
M H z
V / M
SETUP
M W
DIAL
D/A
M H z
V / M
M W
SETUP
Advertisement
Table of Contents
