Using Wires-X And The Gm Function Simultaneously; Registering A Local Node With A Group - Yaesu FTM-400XD Instruction Manual

Using WIRES-X and the GM Function Simultaneously

You can connect to the local node of WIRES-X even when the GM (group monitor)
function of FTM-400DR/DE is in use. By forming a group that includes local nodes and
organizing the GM, group members can utilize WIRES-X to communicate with a node or
room on the Internet, including exchanging data.
This section explains how to use a local node which is registered as a group member.
For details on how to use the GM functions, refer to the separate GM instruction manual
available on the Yaesu website.
Cautions
z The GM function needs to be activated in a digital station that is used for the local node as well.
z Before using the GM function, press
to a mode other than "FM". For details, please refer to "Switching the Communication Mode" in the
instruction manual.

Registering a local node with a group

1
Connect to a local node
2
Press and hold
The group list will appear.
3
Rotate or touch the screen to select [ALL]
4
Touch [ALL]
Call signs and signal strength of other nearby stations
will appear.
Tips • The connected local node is highlighted in yellow.
• Mobile stations within communication range are
highlighted in green.
to change the communication mode of Band A (upper section)
for 1 second or more
48