GM Function
About the GM(Group Monitor) feature
The GM (Group Monitor) function automatically checks to find if there are any stations
with the GM function in operation with the same DG-ID number within communication
range. Setting the receive DG-ID number to "00" will check for all the C4FM digital sta-
tions In/Out of range.
Note: • Activating the GM (Group Monitor) function, the Digital C4FM mode is changed.
• For communicating in the Analog FM mode, Set the GM function OFF.
• The other member stations must also turn the GM (Group Monitor) function ON.
When the GM (Group Monitor) is activated, the following information screens are auto-
matically switched.
GM information screen
(Automatically switching display)
Group Mode Display
*: Memory tag display is displayed in the case of the memory channel or the home channel
setting the memory tag.
In / Out Display
• When another station with the same DG-ID number is within the communication range,
a beep sounds and the " " is displayed, and the lower portions of the Mode/Status
indicator light blue.
• When all the members are out of the communication range, " " (blinks) is displayed
and the Mode/Status indicator light is off.
• When a signal from another member station is received, the call sign of the other sta-
tion is displayed on the LCD for about 10 seconds.
Note: When the DG-ID transmit and receive are set to "00" in the factory default setting, all
stations In/Out of range may be received and are displayed, but the other stations
that set their receive DG-ID number to other than "00" may not be receiving your
signals.
Own DG-ID Number Display
Memory Tag Display*
25
Frequency Display