Chapter 7 Service And Repair; Disposal - Parker 514C Product Manual

7-1
Service and Repair

Chapter 7 Service and Repair

The product has no user serviceable parts and should be returned to Parker Hannifin
Manufacturing Limited for repair. The product should be returned in the original packaging if
possible or else reasonable care should be taken in the packing of the product to ensure that no
transport damage be incurred.
Technical Support can be obtained by contacting Parker Hannifin Manufacturing Limited at
the address given or your local supplier.

DISPOSAL

This product contains materials which are consignable waste under the Special Waste
Regulations 1996 which complies with the EC Hazardous Waste Directive – Directive
91/689/EEC.
We recommend you dispose of the appropriate materials in accordance with the valid
environmental control laws. The following table shows which materials can be recycled and
which have to be disposed of in a special way.
Matrial
metal
plastics material
printed circuit board
The printed circuit board should be disposed of in one of two ways:
1. High temperature incineration (minimum temperature 1200
authorised under parts A or B of the Environmental Protection Act.
2. Disposal in an engineered land fill site that is licensed to take aluminium electrolytic
capacitors. Do not dispose of in a land fill site set aside for domestic waste.
Packaging
During transport our products are protected by suitable packaging. This is entirely
environemntally compatible and should be taken for central disposal as secondary raw
material.
Recycle
yes
yes
no
o
C) by an incinerator
Disposal
no
no
yes
514C Product Manual