Table of Contents
Advertisement
Screen Description
Port
Shows the port number.
Link
Shows the current link status.
Up
Down
Trunk
Shows the group number for a trunked port.
Type
Shows the port type.
100TX
1000T
1000X
Mode
Shows the communication speed and full-duplex/half-duplex settings. The
factory default setting is "Auto" for all ports.
Auto
100-FDx(100F)
100-HDx(100H
)
10-FDx(10F)
10-HDx(10H)
Power-
Shows status of the MNO series power saving mode.
saving
The factory default setting is "Half" for all ports.
Half
Full
Disabled
EEE(802.3
Shows the current EEE (Energy Efficient Ethernet) settings.
az)
The factory default setting is "Disabled".
Enabled
Disabled
Link is established successfully.
Link is not established.
The port type is 10/100BASE-TX.
The port type is 10/100/1000BASE-T.
The port type is SFP extension port.
Auto negotiation mode
100 Mbps full-duplex
100 Mbps half-duplex
10 Mbps full-duplex
10 Mbps half-duplex
Power saving mode is enabled (Half).
Power saving mode is enabled (Full).
Power saving mode is disabled.
EEE is enabled.
EEE is disabled.
83
Advertisement
Table of Contents
