Panasonic PN28080i-ID Operation Manual page 56

4.6.3.f. Modify SNMP User Configuration
On the SNMP User Configuration Menu, pressing "O" opens the Modify
SNMP User Configuration Menu, as shown in Fig. 4-6-11. On this screen, you
can configure the SNMP User settings.
PN28080i Local Management System
SNMP User Configuration Menu -> Modify SNMP User Configuration Menu
Index : 2
User Name
Group Name
READ_VIEW
WRITE_VIEW : test
NOTIFY_VIEW : test
Authentication : MD5
Auth. Key
Privilege
Privilege Key : None
IP address
-------------------------------- <COMMAND> -----------------------------------
Set [U]ser Name
Set [A]uthentication
Set [I]P address
Command>
Enter the character in square brackets to select option
Screen Description
Index Shows the entry number on the SNMP User List.
User Name Shows the SNMP user name.
Group Name Shows the group of the SNMP user.
READ_VIEW
WRITE_VIEW
NOTIFY_VIEW
Authentication Shows the authentication method.
Auth.key Shows the authentication key.
Privilege Shows the encryption scheme.
Privilege Key Shows the encryption key.
: test
: test
: test
: 7b954b5c52218eebd6cdd7083a6d2d30
: None
: 0.0.0.0
Set [G]roup Name
Set [P]riv. Key
[Q]uit to previous menu
Fig. 4-6-11 Modify SNMP User
Shows the name of view to read.
Shows the name of view to write.
Shows the name of view to notify.
56
Set Auth. [K]ey
Set P[r]ivilege