Table of Contents
Advertisement
Screen Description
NAS ID
Displays the authentication ID (NAS Identifier).
Port No
Displays the port number.
Port Control
Displays the operation mode for authentication requests.
Auto
Force
Unauthorized
Force
Authorized
Port Status
Displays the authentication status.
Unauthorized
Authorized
Authorized MAC
Displays the MAC address of a terminal that succeeded in
Address
authentication or a terminal that uses Guest Access.
Displays "--:--:--:--:--:--" when nothing is used.
Operational
Displays the operation status at the time of authentication request.
Control Direction
(Reflects the settings by Administrative Control Direction below.)
Both
In
Administrative
Displays the operation method at the time of authentication request.
Control Direction
Both
In
Per Port Re-auth
Displays whether periodic re-authentication is enabled or disabled.
Enabled
Disabled
Re-Auth Timer
Displays whether or not to use this value when Session-Timeout
Mode
Attribute is reported from the RADIUS server.
RADIUS
Local
Current PVID
Displays the PVID currently applied.
Transmit Period
The number of seconds to wait before requesting the client to
reattempt authentication.
The factory default setting is 30 seconds.
Max Request
The maximum number of times of retransmitting an authentication
request. The factory default setting is 2.
Supplicant
Displays the timeout for the client.
Timeout
The factory default setting is 30 seconds.
Quiet Period
The number of seconds to wait before reattempting a failed
authentication.
The factory default setting is 60 seconds.
The access control function is enabled. The
authentication process relay is performed between
the client and authentication server.
The access control function is disabled. All
authentication requests from the client are ignored.
The access control function is disabled.
Communication of the port is possible without
authorization. (Factory default setting)
Authentication is unauthorized.
Authentication is authorized.
Without authentication, this switch does not
transmit/receive packets from the applicable port.
Without authentication, this switch does not receive
packets from the applicable port.
Without authentication, this switch does not
transmit/receive packets from the applicable port.
Without authentication, this switch does not receive
packets from the applicable port.
Periodic re-authentication is performed.
Periodic re-authentication is not performed. (Factory
default setting)
Preferably uses the Session-Timeout value.
(Factory default setting)
Always uses the Re-auth Period value of this switch.
181
Advertisement
Table of Contents
