Table of Contents
Advertisement
Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next page.
P
Show the previous page.
Press "P." The screen shows the previous page.
C
Go to the screen for creating SNMP group.
Press "C." The command prompt changes to " Please input the SNMP Group Name>."
Enter an SNMP view in 32 one-byte characters or less. Then, the command prompt
changes to " Please input the SNMP Group Version>." Press "1" for SNMP v1. Press "2"
for SNMP v2c. Press "3" for SNMP v3. Then, the Create SNMP Group Configuration
Menu opens.
O
Go to the screen for changing SNMP group.
Press "O." The command prompt changes to " Please input the SNMP Group Name>."
Enter an SNMP view in 32 one-byte characters or less. Then, the command prompt
changes to " Please input the SNMP Group Version>." Press "1" for SNMP v1. Press "2"
for SNMP v2c. Press "3" for SNMP v3. Then, the Modify SNMP Group Configuration
Menu opens.
D
Delete a SNMP group.
Press "D." The command prompt changes to " Please input the SNMP Group Name>."
Enter an SNMP view in 32 one-byte characters or less. Then, the command prompt
changes to " Please input the SNMP Group Version>." Press "1" for SNMP v1. Press "2"
for SNMP v2c. Press "3" for SNMP v3.
M Show additional information on a SNMP group.
Press "M" to display information on Read View Name, Write View Name, Notify View
Name
Q
Return to the previous menu.
65
Advertisement
Table of Contents
