Table of Contents
Advertisement
4.7.3. Port Monitoring Configuration Menu
On the Advanced Switch Configuration Menu, pressing "M" opens the Port
Monitoring Configuration Menu, as shown in Fig. 4-7-7. To analyze
communications, such as by protocol analyzer, in this Switching Hub, you
can monitor packets between other ports that are normally filtered and
cannot be monitored. On this screen, you can configure port monitoring
settings.
PN28080i Local Management System
Advanced Switch Configuration -> Port Monitor Configuration Menu
Monitoring Port
---------------
1
Direction
---------
Both
-------------------------------- <COMMAND> -----------------------------------
[S]et Monitoring Port
Set Ports to be [M]onitored
Set Traffic [D]irection
[C]hange Mirror Status
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-7-7 Port Monitoring Configuration
Be Monitored Port(s)
-----------------------------------------------------------
2
Status
-------------
Disabled
128
Advertisement
Table of Contents
