Panasonic PN28080i-ID Operation Manual page 60

4.6.3.h. Create SNMP View Configuration
On the SNMP View Configuration Menu, pressing "C" opens the Create
SNMP View Configuration Menu, as shown in Fig. 4-6-13. On this screen, you
can configure the SNMP View settings.
PN28080i Local Management System
SNMP View Configuration Menu -> Create SNMP View Configuration Menu
View Name
Subtree
------------------------------------------------------------------- ---------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Pre[v]ious Page
Command>
Enter the character in square brackets to select option
Screen Description
View Name Shows the SNMP View name.
Subtree Shows the SNMP View subtree.
View Type Shows the SNMP View type.
: test
[A]dd OID
[D]elete OID
Fig. 4-6-13 Create SNMP View
60
Type
[Q]uit to previous menu