Table of Contents
Advertisement
4.6.10. ARP Table
On the Basic Switch Configuration Menu, pressing "R" opens the ARP Table
screen, as shown in Fig. 4-6-39. In this screen, you can refer and configure
ARP table.
PN28080i Local Management System
Basic Switch Configuration -> ARP Table
Sorting Method :
ARP Age Timeout : 7200 seconds
IP Address
---------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set ARP Age [T]imeout
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Sorting Method
ARP Age Timeout
IP Address
Hardware Address
Type
By IP
Hardware Address
Type
-----------------
-------
[S]orting Entry Method
[A]dd/Modify Static Entry
[D]elete Entry
Fig. 4-6-39 ARP Table
Shows the order of displaying.
By IP
Shows the table in the order of IP address.
By Static
Shows manually-set addresses.
By Dynamic
Shows auto-learned addresses.
Shows the age-out time of ARP table.
Shows the IP address on ARP table.
Shows the hardware address on ARP table.
Shows the type on ARP table.
Static
The address is manually set.
Dynamic
The address is auto-learned.
110
Advertisement
Table of Contents
