Panasonic PN28080i-ID Operation Manual page 78

Press "S." The command prompt changes to "Enter port number>." Enter a port
number (from 1 to 8) you wish to change. Press "0" to change the settings of all
ports at a time. Then, the command prompt changes to "Enable or Disable
Auto-MDl for port # (E/D)>." Press "E" to enable the function. Press "D" to disable it.
As the change is applied, the display on the screen is updated automatically.
Q Return to the previous menu.
Note: The screen shows the port status; however, the status is not
automatically updated. To display the latest status, press any key.
78