Port Configuration Power Saving - Panasonic PN28080i-ID Operation Manual

4.6.6. Port Configuration Power Saving

The MNO series power saving mode is our unique function for automatically
detecting the port connection status and minimizing power consumption if
not connected. This Switching Hub supports two modes: the Half mode for
giving priority to connectivity with another device, and the Full mode for
minimizing power consumption.
On the Basic Switch Configuration Menu, pressing "o" opens the Port
Configuration Power Saving Menu, as shown in Fig. 4-6-23. On this screen,
you can configure port status display and power saving mode.
PN28080i Local Management System
Basic Switch Configuration -> Port Configuration Power Saving Menu
Port Link Trunk
---- ---- ----- ----------- ------------ -------------- ------------
1 Down ---
2 Down ---
3 Down ---
4 Down ---
5 Down ---
6 Down ---
7 Down ---
8 Down ---
9 Down ---
-------------------------------- <COMMAND> -----------------------------------
Set Power [S]aving mode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-6-23 Port Configuration Power Saving
Type Mode
1000T Auto
1000T Auto
1000T Auto
1000T Auto
1000T Auto
1000T Auto
1000T Auto
1000T Auto
1000X Auto
Set [E]EE Status
82
Power-saving EEE(802.3az)
Half Enabled
Half Enabled
Half Enabled
Half Enabled
Half Enabled
Half Enabled
Half Enabled
Half Enabled
------- -------