Restart Automatically; View Log; View System Information - Speco N32NRE User Manual

Device Management

12.6 Restart Automatically

You can set the automatic restart time for the NVR to maintain it regularly. Click StartàSettingsàSystemàMaintenanceàAuto Maintenance to go
to the interface as shown below. Enable auto maintenance, set the interval days and point of time and then click "Apply" to save the settings. The
NVR will restart automatically at the pointed time every interval days.

12.7 View Log

Click StartàSettingsàSystemàMaintenanceàView Log to go to the log view interface. Select the log main type, click
end time and then click "Search" button. The searched log files will be displayed in the list.
Choose the log file in the list and then click "Export" button to export the log file. Click
contents in the menu list and then the log list will show the checked log contents only. Click

12.8 View System Information

Click StartàSettingsàSystemàInformation and then click the corresponding menu to view the "Basic", "Camera Status", "Alarm Status", "Record
Status", "Network Status" and "Disk" information of the system.
on the "Content" title bar to pop up a menu list. Check
to play the video log.
104
NVR User Manual
to set start time and