Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
8 Disassembly and assembly / 8.5 Axial clearance
8.5 Axial clearance
Clearance A [mm]
© Copyright 2018 . All rights reserved.
WARNING
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
Wear safety gloves.
u
Wear safety gloves to protect against mechanical hazards.
Screw on at least four nuts (74027) along with washers (74018),
u
equally spaced around the circumference, and tighten them to secure
the partition wall axially.
Measure and note the axial clearance (A).
u
CAUTION
If the axial clearance A is out of tolerance, an ABB Turbocharging Ser-
vice Station must be contacted.
HZTL2491_EN
TPL85-B
0.54 ... 0.79
Revision C
August 2018
Advertisement
Table of Contents
