Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
8 Disassembly and assembly / 8.9 Fitting internal part of compressor
casing
Position of the safety seg-
ments after assembly
Control dimension (s)
[mm]
© Copyright 2018 . All rights reserved.
CAUTION
Locked safety segments (76080) during assembly
The safety segments (76080) are not in the operating position. Addi-
tional axial securing of the two compressor casings (74000/76000) is
not guaranteed.
Fit four nuts (74027) complete with washers (74018), equally spaced
u
around circumference, and tighten.
Unscrew the nuts (90458) on threaded studs of three safety seg-
u
ments (76080) on the compressor casing internal part (76000).
The compressor casing internal part (76000) is now secure relative to
the compressor casing external part (74000).
NOTICE
Note control dimension (s). The safety segments (76080) are again in
the operating position.
Dimension
s
Put the nuts (90458) back in the toolbox.
u
HZTL2491_EN
TPL85-B
18.5
Revision C
August 2018
Advertisement
Table of Contents
