Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
8 Disassembly and assembly / 8.10 Dry-cleaning device
Tightening torques [Nm]
© Copyright 2018 . All rights reserved.
Brush the thread of the parts marked with *) with high-temperature
grease.
Fit the connecting plate (51511) onto the pressure vessel (51501) with
u
hexagon-head screws (51518) and washers (51519).
Mount the connecting plate (51511) onto the gas outlet casing with
u
hexagon-head screws (51520).
Fit the screw insert (51514*) onto the gas inlet casing.
u
Fit the straight screw-in coupling (51522*) on the ball valve (51513)
u
and the pipe elbow (51521).
Fit the pipe elbow (51521) onto the screw insert (51514*).
u
Fit the hose (51512*) on the pressure vessel (51501) and on the ball
u
valve (51513).
Fit clamps (51515) on the gas inlet casing.
u
1)
1)
51512
51513
R3/4" –
G1/2" –
G3/4"
R1/2"
1)
Screw in the screw connection hand tight at first, then tighten by another
2 to 3 turns.
HZTL2491_EN
51514
51515
51518
M18x1.5
M6
80
10
51520
51521
51522
M8
M30x2
G1/2" –
25
200
G1/2A
Revision C
August 2018
1)
Advertisement
Table of Contents
