Table of Contents
Advertisement
Operation Manual / TPL85-B14/-B15/-B16
5 Maintenance / 5.5 Cleaning turbine blades and nozzle ring in opera-
tion
5.5.2 Integrated dry cleaning of the turbine and nozzle ring
© Copyright 2018 . All rights reserved.
NOTICE
This cleaning method is not suitable for removing thick dirt deposits
and must therefore be carried out more often (see chapter Cleaning
turbine blades and nozzle ring in operation).
Operating state prerequisites for integrated dry cleaning device
In order to carry out a successful cleaning procedure that has been
tested and is recommended by ABB Turbo Systems, the following pre-
requisite must be met:
Engine load 25 ... 85%
w
Start the cleaning cycle according to the following description Oper-
u
ating the integrated dry cleaning device.
Operating the integrated dry cleaning device
01
Granulate container (51502)
HZTL2491_EN
07 Combined air valve / Pressure-re-
lief valve (51504)
Revision C
August 2018
Advertisement
Table of Contents
